D-Link DIR-878 User Manual

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual
Configuring via Web-based Interface
The following buttons are also available on the page:
Control Description
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Back Panel section, page 13).
Backup
Click the button to save the configuration (all settings of the router)
to your PC. The configuration backup will be stored in the
download location of your web browser.
Restore
Click the button and follow the dialog box appeared to select a
previously saved configuration file (all settings of the router)
located on your PC and upload it.
Save
Click the button to save settings to the non-volatile memory.
The router saves changed settings automatically. If changed settings
have not been saved automatically, a notification is displayed in the
top right part of the page.
Reboot
Click the button to reboot the device. All unsaved changes will be
lost after the device's reboot.
In the Idle time field specify a period of inactivity (in minutes) after which the router completes
the session of the interface. By default, the value 5 is specified. Then click the SAVE button.
Page 167 of 191

D-Link DIR-878 Specifications

General

Color	black
Wi-Fi Speed	1900 megabits per second
Wi-Fi Mesh System	no
Frequency Band	2.4 ghz, 5.0 ghz
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Networking Standard	wi-fi 5
Wireless Standard	ac, n
2.4 Ghz Streams	1
5.0 Ghz Streams	1
Gigabit Ethernet Speed	yes
Antennas	4
Firewall	nat, spi
Data Encryption	yes
Encryption Type	wpa, wpa2
Ports	rj-45
WAN Ports	1

Weight and Dimensions

Height	1.8 inches
Width	10.2 inches
Net Weight	1.2 pounds