DIR-879 Quick Installation Guide
Selecting Connection Method
If DIR-879 is switched to the router mode (the mode selector switch is moved
to the ROUTER position), you can configure it for connection to an ISP.
In order to connect your device to a wired ISP, on the Device mode page,
from the Connection method list, select the Wired connection value. In
this mode you can configure a WAN connection, set your own settings for the
wireless network in the 2.4GHz and 5GHz bands, configure LAN ports to
connect an STB or VoIP phone, and set your own password for access to the
web-based interface of the device.
In order to connect your device to a wireless ISP (WISP), on the Device
mode page, from the Connection method list, select the Wi-Fi value. In
this mode you can connect your device to another access point, configure a
WAN connection, set your own settings for the wireless network in the
2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP
phone, and set your own password for access to the web-based interface of the
device.
19
To Next Page
Loading...
