EasyManuals Logo

D-Link DIR-880L Quick Installation Guide

D-Link DIR-880L
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
DIR-880L
4
ENG LISH
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
1. HOW DO I CONFIGURE MY DIR-880L ROUTER MANUALLY?
- Connect your PC to the router using an Ethernet cable.
- Open a web browser and enter the address ‘http://dlinkrouter.local.(or ‘192.168.0.1’).
- The router password should be left blank by default.
- If you have changed the password and can not remember it, reset the router to return to an empty
password eld.
2. HOW DO I RESET MY DIR-880L ROUTER TO FACTORY DEFAULT SETTINGS?
- Ensure the router is powered on.
- Press and hold the reset button at the bottom of the device for 5 seconds.
Note: Resetting the router to factory default will erase the current conguration settings.
To re-congure your settings, log into the router as outlined in question 1, then run the setup wizard.
3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY
WI-FI NAME (SSID) OR WI-FI PASSWORD?
- For each device that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wi-Fi Name (SSID) and Wi-Fi password.
- Use the web-based user interface (as described in question 1 above) to check or congure your
wireless settings.
- Make sure you write down these settings so that you can enter them for each wirelessly connected
device. The back of this document features an area to record this important information.
4. WHY CAN'T I GET AN INTERNET CONNECTION?
- For ADSL users, please contact your ISP to make sure the service has been enabled/connected
by your ISP and that your ISP username and password is correct.
5. WHY CAN'T I REGISTER MY DEVICE WITH MYDLINK?
- If you experience issues registering this router with your mydlink account, try performing a hard
reset by using an unfolded paperclip to press and hold the reset button for 5 seconds while the
router is powered on. This may be necessary if you purchased an open box or resold unit.

Other manuals for D-Link DIR-880L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-880L and is the answer not in the manual?

D-Link DIR-880L Specifications

General IconGeneral
Ethernet LANYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Ethernet LAN (RJ-45) ports4
USB version3.2 Gen 1 (3.1 Gen 1)
Input current3 A
Rack mountingNo
USB ports quantity2
DHCP client-
Security algorithmsWPA, WPA2, WPS
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-25 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)0 - 90 %
CertificationFCC B\\r CE B\\r C-Tick\\r IPv6 \\r Wi Fi \\r (WPS)\\r (WMM)\\r Windows 8
Weight and Dimensions IconWeight and Dimensions
Depth190.4 mm
Width246.9 mm
Height47.2 mm
Weight745 g

Related product manuals