D-Link DIR-X1530 - Page 146

DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Configuring via Web-based Interface
In the Basic Settings section, the following parameters are available:
Parameter Description
Enable Wireless
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
To enable/disable Wi-Fi connection on a schedule, click the Set
schedule icon ( ). In the opened window, from the Rule drop-
down list, select the Create rule value to create a new schedule
(see the Schedule section, page 228) or select the Select an
existing one value to use the existing one. Existing schedules are
displayed in the Rule name drop-down list.
To enable Wi-Fi connection at the time specified in the schedule and
disable it at the other time, select the Enable wireless
connection value from the Action drop-down list and click the
SAVE button.
To disable Wi-Fi connection at the time specified in the schedule and
enable it at the other time, select the Disable wireless
connection value from the Action drop-down list and click the
SAVE button.
To change or delete the schedule, click the Edit schedule icon
( ). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
Country
The country you are in. Select a value from the drop-down list.
Wireless mode
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Select channel
automatically
Move the switch to the right to let the router itself choose the
channel with the least interference.
Enable additional
channels
If the switch is moved to the left, the device automatically selects
one of available standard channels. To use additional channels (the
12th and 13th – in the 2.4 GHz band, the 100th and higher – in the 5
GHz band), move the switch to the right.
Channel
The wireless channel number.
To select a channel manually, left-click; in the opened window,
select a channel and click the SAVE button. The action is available,
when the Select channel automatically switch is moved to the
left.
Page 146 of 254