DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Configuring via Web-based Interface
Parameter Description
Source port
Select the mode for each port traffic from which should be copied to
the destination port:
• Both: Copy incoming and outgoing traffic from the source
port to the destination port.
• TX: Copy outgoing traffic from the source port to the
destination port.
• RX: Copy incoming traffic from the source port to the
destination port.
Leave the None value for ports from which it is not required to
copy traffic.
After specifying the needed parameters, click the APPLY button.
To disable the function of port mirroring, click the DISABLE button.
Page 189 of 254
To Next Page
Loading...
