D-Link DNS-313

2
Quick Installation Guide
DNS-313
1-BAY SATA NETWORK STORAGE ENCLOSURE
Check Your Package Contents
Default IP: 192.168.0.32
Default Username: admin
Default Password:
Quick Installation
DNS-313
1-BAY SATA
NETWORK
STORAGE
ENCLOSURE
Base Stand
(Device
information
listed
underneath)
CD-ROM (D-
Link Click’n
Connect,
Manual and
Software)
Ethernet
(CAT5 UTP)
Cable
USB Cable Power
Adapter
2 Remove the D-Link
Click and Connect
CD.
3 A. Be sure your Internet
connection is active. DO NOT
plug the storage in yet.
B. Insert the D-Link Click’n
Connect CD into your computer.
4 Click
1 Remove the faceplate (a)
and slide on the base
stand (b). Re-attach the
faceplate when
complete.