Need help?Do you have a question about the D-Link DNS-313 and is the answer not in the manual?
Device Interfaces| Gigabit Ethernet port | 1 10/100/1000 |
|---|---|
| USB port | 1 USB 2.0 |
| Power socket | external power adapter |
Operating Environment| Operating temperature | 0˚ to 55˚ C (32˚ to 131˚ F) |
|---|---|
| Storage temperature | -20˚ to 70˚ C (-4˚ to 158˚ F) |
| Operating humidity | 5% to 90% (non-condensing) |
Weight and Dimensions| Dimensions | 200 (L) x 124 (H) x 49 (W) mm |
|---|---|
| Weight | 1.29 Kg |
| Supported hard drive type | 3.5-inch internal SATA |
Provides step-by-step instructions for physically setting up the DNS-313.
Guides through hardware setup for network storage mode.
Details software for initial setup, configuration, and drive mapping.
Guides initial installation and setup process for the DNS-313.
Instructions for installing and setting up a new hard drive with Click n' Connect.
Utility for locating DNS-313 and mapping network drives.
Configures access rights for specific folders or volumes.
Sets up and manages the built-in FTP server.
Checks for and uploads new firmware releases to the device.
Configures email notifications for operational and drive status conditions.
To Next Page
