Need help?Do you have a question about the D-Link DNS-320 and is the answer not in the manual?
General| Device Type | NAS server |
|---|---|
| Drive Bays | 2 |
| Interface | SATA 3Gb/s |
| Power Supply | External power adapter |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Installed Devices / Modules Qty | 0 |
| Max Supported Qty | 2 |
| Compliant Standards | DLNA CERTIFIED |
| Maximum Internal Raw Capacity | 4 TB |
| RAID Levels | JBOD, RAID 0, RAID 1 |
| Supported Protocols | HTTP |
| USB Ports | 1 x USB |
| Processor | 800 MHz |
| RAM | 128 MB |
| Hard Drive Capacity | 0 GB |
| Network / Transport Protocol | TCP/IP |
| Network Services Protocol | DHCP, DDNS |
| Features | UPnP Media Server, iTunes server, print server |
| Depth | 144 mm |
| Height | 193 mm |
| Supported Drives | 3.5" SATA I/II |
| Operating Temperature | 5 °C to 35 °C |
| Operating Humidity | 10% to 90% (non-condensing) |
Describes status lights for hard drives, indicating connection, activity, and failure.
Informs the user that inserted hard drives will be formatted and data erased.
Selects a RAID type (Standard, JBOD, RAID 0, RAID 1) for the installed hard drives.
Enables or disables the automatic rebuild feature for RAID arrays upon drive failure.
Defines the capacity for the RAID 1 volume and designates remaining space for JBOD.
Displays a summary of the selected RAID configuration before initiating the process.
Assigns an available drive letter to a ShareCenter Pulse volume for network access.
To Next Page