D-Link DNS-313

26D-Link DNS-313 User Manual
Section 3 - Configuration
It is recommended to use the included D-Link Easy Search Utility when accessing and conguring the DNS-313 for the
rst time. If you want to change the IP address before logging in or are unable to connect to the DNS-313 IP address,
you can use the Easy Search Utility provided on the product CD to locate the device on your network and make any
required changes.
The Easy Search Utility displays all available
DNS-313 devices on the network here.
Refresh the device list.
Click Conguration to access the Web-based utility
of the DNS-313.
Congure the LAN Settings for the DNS-313 here.
Click Apply to save and activate the changes to the
LAN Settings.
Volumes available for mapping are displayed here.
Choose an available drive letter. Click Connect
to map the selected volume. Click Disconnect to
disconnect the selected mapped volume.
Click Exit to close the utility.
Click to see the basic firmware and copyright
information about D-Link Easy Search Utility.
Network Storage
Device
Refresh
Configuration
LAN
Apply
Drive Mapping
Available Drive
Letters
Exit
About
Easy Search Utility
Utility Overview