D-Link DNS-321

5 D-Link DNS-321 Quick Install Guide
Hardware Installation
Hardware Installation
1. Accessthedrivebaysbysliding
thefaceplateupuntilitunlatches
fromthedevice.
2. Oncethefaceplateisunlatched,
pullitoffofthedevice,exposing
thedrivebays.
3. Insert a 3.5” SATA hard drive
intoanavailabledrivebay.Make
suretoalignthedriveconnector
totheendpointintheDNS-321.
Gentlypush thedrive inuntil it
connects.