Need help?Do you have a question about the D-Link DPH-400S and is the answer not in the manual?
Crucial safety notices for device installation and operation, covering power, handling, environment, and electrical hazards.
Details the function and purpose of each key on the phone's keypad for user operation.
Guides on connecting the phone to the network and power sources for initial operation.
Details setting up network parameters like PPPoE, Static IP, and DHCP for connectivity.
Customizing the function of programmable keys for speed dial, intercom, and other features.
Setting up custom dialing rules for outgoing calls, including prefixes and length.
Setting up SIP accounts, server addresses, and authentication parameters.
Configuring menu passwords, keylock status, and other security parameters.
Restoring the phone to its default factory settings to resolve issues.
Instructions on how to access the phone's web interface using a browser.
Displays current WAN, LAN, and SIP account status information within the web UI.
Guides through network and SIP setup using a step-by-step wizard interface.
Inputting static IP details and basic SIP registration parameters via web UI.
Configuring network modes (DHCP/PPPoE) and SIP details via web UI.
Configuring Wide Area Network (WAN) connection details like IP, mask, and gateway.
Choosing between Static IP, DHCP, or PPPoE for WAN connection.
Configuring Local Area Network (LAN) IP address, DHCP, NAT, and bridge mode.
Managing DHCP client table, lease settings, and DNS relay for network address assignment.
Setting up the SIP server, domain, and related parameters for VoIP calls.
Choosing SIP lines and configuring audio codecs for optimal call quality.
Detailed SIP options including call forwarding, encryption, and keep-alive timers.
Comprehensive breakdown of SIP registration, server, and user authentication details.
Further SIP settings like hotlines, encryption, auto-answer, and session timers.
Configuring authentication, proxy, GRUU, and missed call logging for SIP.
Setting up STUN for NAT traversal to enable SIP communication through firewalls.
Specific STUN settings for NAT penetration and SIP line configuration.
Defining flexible dialing rules for IP addresses and long-distance calls.
Interface for adding, modifying, and deleting dial peer rules.
Setting voice codecs, input/output volumes, and tone standards.
Configuring core call features like transfer, waiting, DND, and auto-answer.
Explains the four dial modes: End with '#', Fixed Length, Time Out, and User Defined.
GUI for setting up dial plan rules like fixed length and blind transfer.
Adding, importing, exporting, and organizing contacts in the phonebook.
Configuring DSS keys for various functions like line, event, or memory.
Configuring automatic firmware and configuration updates from a server.
Managing phone firmware updates and TR069 remote management.
Setting up input and output access rules to protect the network.
Setting up VPN modes like L2TP and OpenVPN for secure network access.
To Next Page
General
