D-Link DRA-2060 - Technical Support Setup Procedure Manual

Technical Support Setup Procedure
Page | 1
How to setup DRA-2060 as mesh extender?
Step 1: Connect to current Exo mesh router
Wifi.
Step 2: Open D-Link Wi-Fi Apps on the
Android mobile device.
Step 3: Click on Menu Icon.
Step 4: Click on Install New Device.
Step 5: a) Click on Scan the QR code.
b) Scan the QR code on the device.
Step 6: a) Ensure you are connected to your
Wi-Fi Network.
b) Click on Next
Step 7: Wait for Detecting device to finish.