DSL- G2452GE
4
ENGLISH
PRODUCT SETUP
Step 1
Position your DSL-G2452GE near your PC and a telephone wall
jack which provides DSL service. Keep the modem router in an open
area for better wireless coverage.
PC
DSL-G2452GE Phone
Step 2
Connect one of the included phone cables from LINE port on the
microlter/splitter to a telephone outlet which provides VDSL/ADSL
sevice.
Connect the other included phone cable from the MODEM port on
the microlter/splitter to the DSL port of the modem router.
PC
DSL-G2452GE Phone
HARDWARE SETUP
Step 3
Connect the supplied power adapter to the modem router and a
power outlet, and press the power button. The device LEDs will light
up. Wait approximately one minute before going on to step 4.
DSL-G2452GEPower
PC
Step 4
Plug one end of the supplied Ethernet cable into the port labeled
1 on the back of the modem router, and the other end into the
Ethernet port on your computer.
If you are setting up the DSL-G2452GE using a laptop or mobile
device, connect it using the Wi-Fi network name and password
printed on the label attached to the back your router.
DSL-G2452GEPower
PC
SYSTEM REQUIREMENTS
• ADSL/VDSL Internet service
• Computer with:
• Microsoft Windows
®
10/8/7/Vista/XP SP3 or Mac with OS X 10.7 or higher
• Internet Explorer 8, Edge 25, Firefox 20, Safari 4, or Chrome 17 or higher version with Java
installed and enabled
PC
To Next Page
Loading...
Need help?
General
