2
Installing the DUB-H4
A. Plug the USB type B connector
(the larger end of the cable) into
the back of the DUB-H4.
B. Plug the AC adapter into the
DUB-H4 and into a power
socket in a power-strip or a wall
jack.
C. Plug the USB type A connector
(the narrow end of the cable)
into an available USB 2.0 port
on your computer (or USB 1.1
if you don’t have USB 2.0).
D. Your computer will automatically detect and install the DUB-H4.
You may now connect USB 2.0 or USB 1.1 devices to an available
USB port on the front of the DUB-H4.
To Next Page
Loading...
