ENGLISH
DUB-M610
3
PRODUCT SETUP
Note: The device may become warm to touch while in use. This is within normal
operating temperature.
TECHNICAL SUPPORT
Step 1:
Plug the DUB-M610’s USB Type-C connector into an available USB Type-C
port on your computer.
Step 2:
Connect a HDMI cable to the DUB-M610’s HDMI port.
Step 3:
Attach the other end of the HDMI cable to your HDMI display.
Step 4 (Optional):
Connect up to two USB devices to the USB 3.0 ports. You can also use the
USB Type-C port to charge your USB Type-C device or to deliver power to
your laptop. Use the dual-slot card reader to access data on a SD or microSD
card simultaneously.
USB 3.0
Computer
SD
micro
SD/microSD
Card
Monitor
Television Projector
HDMI Display
USB Type-C
eu.dlink.com/support
To Next Page
Loading...
