D-Link DWA-525

27D-Link DWA-525 User Manual
Section 3 - Configuration
Connect to a Wireless Network
Using Windows
®
7
Windows
®
7 users may use the built-in wireless utility. If you are using another company’s utility or Windows
®
2000,
please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities
will have a “site survey” option similar to the Windows
®
7 utility as seen below.
Left-click the wireless icon in your system tray (lower-right
corner next to the time).
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet,
check your TCP/IP settings for your wireless adapter. Refer
to the Networking Basics section in this manual for more
information.