DWL-2100AP
D-Link
AirPlus
XtremeG
TM
802.11g/108Mbps
Wireless Access Point
5V 2.0A DC Power Adapter
©2004, 2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specifications subject to change without notice. DWL-2100AP. 12152004
Before You Begin
Check Your Package Contents
DWL-2100AP 802.11g/108Mbps Wireless
Access Point
CD-ROM (containing Manual and
Warranty)
Ethernet (CAT5 UTP) Cable
If any of the above items are missing, please contact your reseller.
It’s best to use a computer (with an Ethernet adapter) that is connected to a switch
for configuring the DWL-2100AP. The default IP address for the DWL-2100AP is
192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your
computer a Static IP address within the same range as the DWL-2100AP’s IP address
for the purpose of configuring the DWL-2100AP. See the Appendix if you need
assistance in assigning a Static IP address for your network adapter.
Using a power
supply with a
different voltage rating
will damage and void the
warranty of this product.
This product can be set
up using any current web
browser, i.e., Internet
Explorer 6 or Netscape
Navigator 6.2.3.
3
To Next Page
Loading...
