D-Link DWL-2100AP Install Guide

2D-Link DWL-2100AP Quick Install Guide
System Requirements
Package Contents
• Access Point
• Antenna
• CD-ROM (with software, manual, and warranty)
• Ethernet Cable
• 5V/2A Power Adapter
• Rubber Feet
• A Network with 802.11g/b wireless devices
It’s best to use a computer (with an Ethernet adapter)
that is connected to a switch or router for configuring the
DWL-2100AP. The default IP address for the DWL-2100AP
is 192.168.0.50 with a Subnet Mask of 255.255.255.0.
You will need to assign your computer a Static IP address
within the same range as the DWL-2100AP’s IP address
for the purpose of configuring the DWL-2100AP. See the
Appendix if you need assistance in assigning a Static IP
address for your network adapter.
Before You Begin

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater