D-Link DWL-2100AP Install Guide

6D-Link DWL-2100AP Quick Install Guide
A. First, connect the power adapter to the receptor at the
back panel of the DWL-2100AP and then plug the other
end of the power adapter to a wall outlet or power strip. The
Power LED will turn ON to indicate proper operation.
B. Insert one end of the cable to the Ethernet port on the
back panel of the DWL-2100AP and the other end of the
cable to your network (switch or router).
Note: You also have the option of connecting the
DWL-2100AP directly to the computer that will be used
for configuration. The Link LED light will illuminate
to indicate a proper Ethernet connection. (Note: The
Ethernet Port on the DWL-2100AP is Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover
Ethernet cable to connect to the Ethernet port on the
DWL-2100AP.)
C. The DWL-G650 AirPlus Xtreme G Wireless Cardbus
Adapter and the DWL-G520 AirPlus Xtreme G Wireless
PCI Adapter will connect, out of the box, with the
DWL-2100AP, using their default wireless settings.
Computers with 802.11b wireless adapters can also
connect to the DWL-2100AP.
Connecting the DWL-2100AP Wireless
Access Point to Your Network

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater