EasyManua.ls Logo

D-Link DWL-3200A

D-Link DWL-3200A
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
802.11 a/g Dual Band Access Point Command Line Interface Manual
9
get fragmentthreshold Display Fragment Threshold in bytes get fragmentationthreshold
get frequency Display Radio Frequency (MHz) get frequency
get gateway Display Gateway IP Address get gateway
get groupkeyupdate Display Group Key Update Interval (in Seconds) get groupkeyupdate
get hardware Display Hardware Revisions of WLAN Components get hardware
get hostiipaddr Display Host IP Address get hostipaddr
get ipaddr Display IP Address get ipaddr
get ipmask Display IP Network/Subnet Mask get ipmask
get key Display specified Encryption Key get key [1-4]
get keyentrymethod Display Encyrption Key Entry Method ASCII or Hexadecimal get keyentrymethod
get keysource
Display Source Of Encryption Keys: Flash Memory (static), Key Server
(dynamic), or mixed
get keysource
get lcp Display LCP state get lcp
get lcplink Display Ethernet Link State get lcplink
get login Display Login User Name get login
get macaddress Display Macaddress get macaddress
get passphrase Display Passphrase get passphrase
get power Display Transmit Power Setting: Full, half, quarter, eighth, min get power
get targetPower Display Target Power Setting get targetPower
get controlPower Display Control Power Setting get controlPower
get swPower Display Software Power Setting get swlPower
get radiusname Display RADIUS server name or IP address get radiusname
get radiusport Display RADIUS port number get radiusport
get accountingstate Display Accounting Mode (enabled or disabled) get accountingstate
get accountingname Display Accoun ting server name or IP address get accountingname
get acountingport Display Accounting port number get acountingport
get rate Display current Data Rate selection. Default is best. get rate
get remoteAp Display Remote AP's Mac Address get remoteAp
get rtsthreshold Display RTS/CTS Threshold get rtsthreshold
get roguebsstype Display Rogue AP BSS type get roguebsstype
get roguesecurity Display Rogue AP Security Type get roguesecurity
get roguebandselect Display rogue AP Band Select get roguebandselect
get shortpreamble Display Short Preamble Usage state: enabled or disabled get shortpreamble
get sntpserver Display SNTP/NTP Server IP Address get sntpserver
get tzonelist Display Time Zone get tzonelist
get tzone Display Time Zone Setting get tzone
get daylightsaving Display Day Light Saving Time get daylightsaving
get ssid Display Service Set ID get ssid

Related product manuals