802.11 a/g Dual Band Access Point Command Line Interface Manual
10
get ssidsuppress Display SSID Suppress Mode as enabled or disabled get ssidsuppress
get station Display Client Station Connection Status get station
get SuperG Display SuperG Feature Status of enabled or disabled get SuperG
get systemname Display Access Point System Name get systemname
get sta2sta Display wireless STAs to wireless STAs connect state get sta2sta
get eth2sta Display ethernet to wireless STAs connect state get eth2sta
get telnet Display Telnet Status of current login, number of login attempts, etc. get telnet
get timeout Display Telnet Timeout in seconds get timeout
get uptime Display UpTime get uptime
get wirelessmode Display Wireless LAN Mode get wirelessmode
get wlanstate Display wlan state status (enabled or disabled) get wlanstate
get wmm Display WMM mode status (enabled or disabled) get wmm
get wmmParamBss ac Display WMM EDCA parameters used by STA in this BSS get wmmParamBss ac
get wmmParam ac Display WMM EDCA parameters used by this AP get wmmParam ac
get smtplog Display SMTP with Log Status (enabled or disabled) get smtplog
get smtpserver Display SMTP server (IP or Name) get smtpserver
get smtpsender Display Sender get smtpsender
get smtprecipient Display Recipient Email Address get smtprecipient
get vlanstate Display Vlan State status (enabled or disabled) get vlanstate
get nativelan Display Native Vlantag get nativelan
get multii-state Display Multi-SSID Mode (enabled or disabled) get multii-state
get multi-ind-state [index]
Display Individual Multi-SSID State
get multi-ind-state [index]
get Vlantag Display Vlantag get Vlantag
get multi-ssid [index] Display SSID of the specify Multi-SSID get multi-ssid [index]
get multi-ssidsuppress [index] Display SSID Suppress Mode of the specify Multi-SSID get multi-ssidsuppress [index]
get multi-wmm [index] Display WMM mode of specify Multi-SSID get multi-wmm [index]
get multi-authentication [index]
Display Authentication Type for Multi-SSID get multi-authentication [index]
get multi-cipher [index] Display Encryption cipher for Multi-SSID get multi-cipher [index]
get multi-keyentrymethod
Display Encryption Key Entry Method for Multi-SID get multi-keyentrymethod
get multi-vlantag [index] Display Vln=tag for Muelti-SSID get multi-vlantag [index]
get multi-key [index] Display Encryption Key for Multi-SSID get multi-key [index]
get multi-keysource [index] Display Key Source for Mulit-SSID get multi-keyso-urce [index]
get multi-config [index] Display AP Configuration for Multi-SSID get multi-config [index]
get multi-passphrase [index] Display Passphrase for Multi-SSID get multi-passphrase [index]
get multi-acct-state Dislay Accounting State for Multi-SSID (enabled or disabled) get multi-acct-state
To Next Page
Loading...
