16
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Authentication:
Open System
Shared Key
Open System/Shared Key
WPA-EAP
WPA-PSK
WPA2-EAP
WPA2-PSK
WPA-Auto-EAP
WPA-Auto-PSK
Home > Wireless > AP mode (continued)
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same
WEP settings.
Select Open System/Shared Key to allow either form of data encryption.
Select WPA-EAP, WPA2-EAP, WPA-Auto-EAP to secure your network with the inclusion
of a RADIUS server.
Select WPA-PSK, WPA2-PSK, WPA-Auto-PSK to secure your network using a
password and dynamic key changes. (No RADIUS server required).
Using the Configuration Menu
Valid Key:
First through
Fourth keys:
Home > Wireless > AP mode > WEP Encryption
Encryption:
Select Disabled or Enabled. (Disabled is selected here).
Key Type*:
Key Size:
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
*Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.
To Next Page
Loading...
