51
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Device Configuration > Wireless
Using the AP Manager
A pulldown menu for selecting the transmit power of the selected
device(s).
Tx Power:
Beacons are packets sent by an access point to synchronize a
network. Specify the beacon value for the selected device(s) here.
The default value of 100 is recommended.
Beacon Interval
(20~1000):
DTIM (1~255):
DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next listening window for broadcast and multicast
messages.
Select this option to automatically select the most optimal channel
available for wireless networking.
Auto Channel:
This sets the fragmentation threshold (specified in bytes). Packets
exceeding the value set here will be fragmented. The default is 2346.
Fragment
Length
(256~2346):
The RTS value should not be changed unless you encounter
inconsistent data flow. The default value is 2346.
RTS Length
(256~2346):
*”Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead
lower actual data throughout rate.”
To Next Page
Loading...
