32
Using the Configuration Menu
Select the Security type OFF, WEP, WPA-Enterprise, WPA-Personal,
WPA2-Enterprise, WPA2-Personal, WPA-Auto-Enterprise, and
WPA-Auto-Personal that you would like to consider during AP
detection.
This window shows all of the neighbor APs detected, which is based
on your criteria from above (BSS Type, Band, and Security). If the
AP is in the same network, or if you know the AP, just click on “Add”
to save it to the AP list.
This window shows all of the APs that are allowed access on the
network.
Security:
Rogue AP List:
AP List:
To Next Page
Loading...
