33
Using the Configuration Menu
Home > Advanced Settings > DHCP Server > Dynamic Pool Settings
DHCP Server
Control:
IP Assigned From:
Dynamic Host Configuration Protocol assigns dynamic IP
addresses to devices on the network. This protocol simplies
network management and allows new wireless devices to receive
IP addresses automatically without the need to manually assign
new IP addresses.
Select Enable to allow the DWL-3260AP to function as a DHCP
server.
Enter the number of IP addresses available for assignment.
The Range of Pool
(1-255):
Input the rst IP address available for assignment in your network.
SubMask:
All devices in the network must have the same subnet mask to
communicate. Enter the submask for the network here.
To Next Page
Loading...
