EasyManuals Logo

D-Link DWL-3600AP Specifications

D-Link DWL-3600AP
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
DWL-3600AP Unied N Access Point
Unified Management
When deployed in conjunction with D-Link’s line of Unified Wireless Switches
or Wireless Controllers, up to 256 DWL-3600AP units may be centrally managed
and provisioned, thus enabling the administrator to expand the Wi-Fi network
to cover a large area.
Security
The DWL-3600AP supports the latest standards in Wi-Fi security, including
WPA, WPA2, and 802.1X. In addition, the DWL-3600AP supports up to 16 virtual
access points (VAP), which allows the administrator to assign different access
privileges to different groups of users. When used together with D-Link’s line of
Unified Wireless Switches or wireless controller, security can be raised to a new
level. Rogue APs in the network may be easily detected, and the administrator
will be immediately notified of any security threat.
Automatic RF Management
When a number of access points are deployed close to each other, interference
may result if proper RF management is not implemented. When a DWL- 3600AP
senses a neighbor AP at startup, it will automatically select a non-interfering
channel. This greatly reduces RF interference and will allow the administrator
to deploy APs more densely. With a DWC Wireless Controller or DWS Unified
Wireless Switch, you can also adjust the transmit power dynamically. When a
nearby managed AP is operating on the same channel, the DWL-3600AP will
automatically lower its transmission power to minimize interference. When
that managed AP is no longer present, the DWL-3600 will increase it’s transmit
power to expand coverage.
Quality of Service
The DWL-3600AP is WMM-certified, so in the event of network congestion,
time-sensitive traffic can be given priority ahead of other traffic. Furthermore,
when a number of DWL-3600APs are in close proximity with each other, an
access point will refuse new association requests once its resources are fully
utilized. Instead, the association request will be picked up by a neighboring
AP. This feature ensures that no single AP is overburdened while others
nearby sit idle.
Convenient Installation
With an embedded antenna and simple styled exterior, the DWL-3600AP can
be installed on a wall or ceiling and blends in with most interior decorations
in an oce. Enclosed in a plenum-rated chassis, the DWL-3600AP adheres
to strict re codes for placement in air passageways. For easy installation,
the DWL-3600AP has integrated 802.3af Power over Ethernet (PoE) support,
allowing installation of this device in areas where power outlets are not
readily available.
Deployment Scenario: AP Clustering
Deployment Scenario: Unied Management

Other manuals for D-Link DWL-3600AP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWL-3600AP and is the answer not in the manual?

D-Link DWL-3600AP Specifications

General IconGeneral
Frequency band2.4 GHz
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate300 Mbit/s
Quality of Service (QoS) supportYes
Data transfer rate1 Gbit/s
Wireless technology802.11 b/g/n
Antennas quantity2
Antenna gain level (max)4.7 dBi
InternalNo
CertificationFCC, CE
LED indicatorsLAN, Power, WLAN
InterfaceRJ-45
WAN connectionEthernet (RJ-45)
Security algorithms128-bit WEP, 64-bit WEP, SSID, WPA, WPA2
Storage temperature (T-T)-20 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Power supply8 W
Input current2.5 A
AC input voltage5 V
Weight and Dimensions IconWeight and Dimensions
Weight635 g
Dimensions (WxDxH)203 x 203 x 48 mm

Related product manuals