D-Link DWL-8610AP

DWL-8610AP Install Guide 5
You may power the access point using one of the following methods.
1. Use the power adapter included in the package
2. Connect the access point to an external power-over-Ethernet (POE)
switch
You may congure the access point using one of the following methods.
1. Directly connect the access point to a computer. You may then congure
the access point through its graphical user interface (GUI)
2. Connect the access point to your computer using the included console
cable. You may then congure the access point through its command
line interface (CLI)