Page | 2
3) Select SPRD_NPI_USBDriver_1.4 and run the installation file depending on the system format
(32bit or 64bit). Windows will prompt you if you have selected the incorrect format. Select the
other installation file if you encounter the message. Follow the instructions on screen and click
“Finish”.
4) Select SPRD_USBDriver and run the installation file depending on the system format (32bit or
64bit). Windows will prompt you if you have selected the incorrect format. Select the other
installation file if you encounter the message. Follow the instructions on screen and click “Finish”.
5) Select ResearchDownload Bin ResearchDownload.exe
6) Start the program (the program can take about 30s to 2min to open). You will be presented with
the below program screen. Press the Gear icon as indicated by the arrow
To Next Page
Loading...
