D-Link EAGLE PRO AI M15 - Page 37

31D-Link M15 User Manual
Section 3 - Conguration
Static IPv6
Select Static IP if your IPv6 information is provided by your Internet Service
Provider (ISP).
Use Link-Local
Address
Enable or disable link-local address use. Enabling this feature will use
your local IPv6 address as the static IP. Disable this feature to manually
enter your static IPv6 address and subnet prex length.
IPv6 Address If Use Link-Local Address is disabled, enter the address supplied
by your ISP.
Subnet Prex
Length
If Use Link-Local Address is disabled, enter the subnet prex length
(1~128) supplied by your ISP.
Default Gateway Enter the default gateway for your IPv6 connection.
Primary DNS Server Enter the primary DNS server address.
Secondary DNS
Server
Enter the secondary DNS server address.
LAN IPv6 Address Settings
LAN IPv6 Address Enter the LAN (local) IPv6 address for the M15.
LAN IPv6 Link-Local
Address
Displays the M15's LAN link-local address.