D-Link EAGLE PRO AI M15 - Upgrade

77D-Link M15 User Manual
Section 3 - Conguration
Upgrade
This page allows you to upgrade the extender’s rmware, either automatically
or manually. To manually upgrade the rmware, you must rst download the
rmware le from http://support.dlink.com.
Go to Management > Upgrade to access this page.
Firmware Information
Current
Firmware
Version
Displays the current rmware version for both the main router as
well as the extenders.
Check for New
Firmware
Click this button to prompt the router to automatically check for a
new rmware version. If a newer version is found, it will prompt you
to install it.
Automatic Firmware Upgrade
Automatic
Upgrade
If enabled, the router will automatically upgrade to the newest
firmware. The system will automatically upgrade to the latest
rmware every day at 3:30-4:00 AM.
Choose Upgrade
Time
Enable this function to set the device to automatically upgrade its
rmware at a set time every day.
Upgrade Time Congurable if Choose Upgrade Time is enabled. Set the hour and
minute to automatically upgrade the device.
Upgrade Manually
Device Name Select the device in the mesh network for manual update.
Select File If you wish to upgrade manually, rst download the rmware le.
Then, click the Select File button and locate the le to install the
new rmware.