86D-Link DIR-X1870 User Manual
Section 3 - Conguration
Email Settings
Enable E-mail 
Notication
Enable this option if you want the logs to be automatically 
sent to an email address.
If you enabled Enable E-mail Notication, the following options will appear:
From E-mail Address Enter the email address your SysLog messages will be sent 
from.
To E-mail Address Enter the email address your SysLog messages will be sent to.
SMTP Server Address Enter your SMTP server address.
SMTP Server Port Enter your SMTP server port.
Enable Authentication Check this box if your SMTP server requires authentication.
Account Name Enter your SMTP account name.
Password Enter your SMTP account's password.
E-mail Log When Full or On Schedule
Send When Log Full If enabled, this option will set the router to send the log when 
it is full.
Send on Schedule If enabled, this option will set the router to send according to 
a set schedule.
Schedule If you enable Send On Schedule, use the drop-down menu to 
select a schedule to apply. The schedule may be set to Always 
Enable, or you can create your own schedules in the Schedules 
section. Refer to Time & Schedule - Schedule on page 84 
for more information.