EasyManua.ls Logo

D-Link GO-SW-8G

D-Link GO-SW-8G
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GO-SW-5G & GO-SW-8G 5/8 Port Unmanaged Gigabit Switch
Technical Specications
GO-SW-5G GO-SW-8G
Switching Fabric 10Gbps 16Gbps
Standards IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair
copper)
IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-
pair copper)
ANSI/IEEE 802.3 NWay auto-negotiation
IEEE 802.3x Flow Control
IEEE 802.3az Energy-Efficient Ethernet (EEE)
Protocol CSMA/CD
Data Transfer Rates Ethernet:
- 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet:
- 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit Ethernet:
-2000 Mbps (full duplex)
Topology Star
Network Cables 10BASE-T:
- UTP CAT 3, 4, 5/5e (100 m max.)
- EIA/TIA-586 100-ohm STP (100 m max.)
100BASE-TX, 1000BASE-T:
- UTP CAT 5/5e (100 m max.)
- EIA/TIA-568 100-ohm STP (100 m max.)
Media Interface Exchange Auto MDI/MDIX adjustment for all ports
LED Indicators Per port: Link/Activity/Speed Per device: Power
Transmission Method Store-and-forward
MAC Address Table 2K 8K
MAC Address Learning Automatic update
Packet Filtering/Forwarding Rates Ethernet: 14,880 pps per port
Fast Ethernet: 148,800 pps per port
Gigabit Ethernet: 1,488,000 pps per port
RAM Buffer 128KB per device
Jumbo Frames 9,216 Bytes
General Specications
DC Input External 5 V/1 A Level “V” Power Adapter
Power Consumption DC input: 1.67 watts
AC input: 2.7 watts
DC input: 3.06 watts
AC input: 3.9 watts
MTBF 815,700 hours 412,433 hours
Operating Temperature 32 to 104 ˚F (0 to 40 ˚C)
Storage Temperature 14 to 158 ˚F (-10 to 70 ˚C)
Operating Humidity 10% to 90% RH non-condensing

Other manuals for D-Link GO-SW-8G

Related product manuals