Do you have a question about the D-Link GO-SW-8G and is the answer not in the manual?
MAC address table | 8000 entries |
---|---|
Jumbo frames support | Yes |
Packet buffer memory | 0.125 MB |
Maximum data transfer rate | 1 Gbit/s |
Supported data transfer rates | 10, 20, 100, 200, 1000, 2000 Mbps |
10G support | - |
Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
Switch type | Unmanaged |
Power connector | DC-in jack |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Power consumption (typical) | 3.9 W |
Certification | FCC, ICES, CE, C-tick, VCCI, cUL/UL, CCC, LVD |
Product color | White |
Mean time between failures (MTBF) | 412433 h |
Storage temperature (T-T) | -10 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 90 % |
Operating relative humidity (H-H) | 10 - 90 % |
Connectivity technology | Wired |
Depth | 68.5 mm |
---|---|
Width | 128 mm |
Height | 25.4 mm |
Weight | 195 g |
Explains Fast Ethernet and Gigabit Ethernet standards and their evolution.
Details power-saving features and Energy-Efficient Ethernet (EEE).
Describes the switch's ports, bandwidth capabilities, and network segmentation.
Lists key functionalities like Auto-Negotiation, Auto-MDI/MDIX, and duplex support.
Identifies and describes the LEDs and ports on the front of the switch.
Explains the meaning of each LED indicator light (Power, Link/Act).
Describes the rear panel components, specifically the DC power jack.
Details the items included in the switch package for setup.
Guidelines for choosing a suitable installation site and environment.
Procedure for connecting the power adapter and powering up the switch.
How to connect PCs, routers, or other end devices to the switch.
Connecting the switch to existing hubs or other switches.
Uplinking the switch to a network backbone or server.