43
Using the DVC-1000 with Routers, Gateways
or Broadband Modems (continued)
You have now completed the entering of one port to be opened. You will need to
open six more ports.
Repeat steps A through G five more times for each one of the following five
ports: 15329, 15330, 15331, 15332 and 15333.
The last port will be opened slightly differently:
Repeat steps A through C on the previous page.
Choose TCP as the Protocol Type
Enter 1720 as the Private Port and Public Port
Under Schedule, Click Always
Click Apply to complete
Opening Ports on Your Routers and Gateways (continued)
You have now completed the opening of the 7 ports. Your DVC-1000 is ready to
use with your router or gateway!
(Important: Not all routers and gateways are the same; please refer to your
user manual for specific instructions on opening ports.)
To Next Page
Loading...
Need help?
General
