D-Link ShareCenter DNS-343 Quick Installation Guide

8D-Link DNS-343 Quick Install Guide
Hardware Installation

1. Access the drive bays by sliding
the faceplate up until it unlatches
from the device.
2. Once the faceplate is unlatched,
pull it off of the device, exposing
the drive bays.
3. Insert a 3.5” SATA hard drive
into an available drive bay. Make
sure to align the drive connector
to the endpoint in the DNS-343.
Gently push the drive in until it
connects.

D-Link ShareCenter DNS-343 Specifications

General

Brand	D-Link
Model	ShareCenter DNS-343
Category	Network Hardware
Language	English