D-Link TL-WR841N User Manual

Hardware Connection
1
Quick Installation Guide
300Mbps Wireless N Router
MODEL NO. TL-WR841N/TL-WR841ND
Connecting by Easy Setup Assistant
2
7106503292
Package Contents
System Requirement
· Windows 7 · Windows Vista · Windows XP · Windows 2000
QIG
300Mbps Wireless N Router
MODEL NO. TL-WR841N/TL-WR841ND
Resource CD
Cable/DSL Modem
Internet
1
2
3
Connect the WAN port on your Router to the Modem’s LAN port with an Ethernet cable.
Connect your computer to any Port labeled 1~4 on the Router with an Ethernet cable.
Plug the provided Power Adapter into the Power jack on the back of the Router and the other end to a standard electrical Wall socket.
Press the ON/OFF button to power on the Router.
1
2
3
1
Insert the TP-LINK resource CD into the CD-ROM drive.
2
Here we take TL-WR841ND for example. Select ‘TL-WR841ND’
and click ‘Easy SetupAssistant’.
3
After conrming the hardware connection and the status
of LEDs, Click ‘NEXT’ to continue.
4
After the connectivity is checked successfully, please click
‘NEXT’.
5
Select the connection type your ISP provides and click ‘NEXT’.
Here we take ‘PPPoE‘ connection for example.
7
Create a unique or easy-to-remember name for your
wireless network. You can also keep the default setting.
Click ‘NEXT‘ to continue.
8
You are recommended to select ‘ Most Security
(WPA2-PSK)
‘ to secure your wireless network. Enter
a key of 8 ~ 63 characters and click
‘ NEXT ‘ .
6
Enter the ‘User Name‘ and ‘Password‘ provided by you ISP
and click ‘NEXT‘.
Ethernet Cable
TL-WR841N/TL-WR841ND Power Adapter
The Easy Setup Assistant is not supported in Linux or Mac OS. If you are runing Linux /Mac or without CD-ROM, Please refer to Appendix 1.
(Turn over)

D-Link TL-WR841N Specifications

General

Frequency Band	2.4 GHz
Wireless Speed	Up to 300 Mbps
Security	WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing
Wireless Standard	IEEE 802.11n
Ethernet Ports	4 x 10/100 Mbps
WAN Port	1 x 10/100 Mbps
Weight	350 g
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Antenna	2 x 5dBi fixed omni directional antennas

Summary

Package Contents

Hardware Connection

Physical Router Setup

Connect modem to router WAN port, computer to router LAN port, and plug in power adapter.

System Requirements

Connecting by Easy Setup Assistant

Initial Setup Steps

Insert CD, select model, launch assistant, check connectivity, select ISP type.

Configuration and Security

Enter ISP credentials, set wireless network name (SSID) and security key.

Connecting by WEB Management Interface

Manual Configuration Guide

Set static IP, login, use Quick Setup for auto-detection or manual configuration.

Troubleshooting

Restoring Factory Defaults

Press and hold the RESET button on the rear panel for 8 to 10 seconds.

Resolving Internet Connectivity

Check cables, verify router access, clone MAC address, or change LAN IP address.

Technical Support