Timer Settings
While in Timer mode, press the Set button to enter
settings.
Delay
Press the Up/Down buttons to choose between the
Start Delay options.
If Custom “C” is selected, hold down the SET button
to set the desired Delay time. Press MODE to exit.
Par
Press the UP/DOWN buttons to set the Par time.
Holding down the SET button deletes the Par.
Auto Start (AUtSt)
Press the UP/DOWN buttons to select On/Off. When
Auto Start is set to OFF, you will need to press the
REV button at least once, before you can start the
Timer again.
Beep Type
Press the UP/DOWN buttons to select between
High/Low and Silent beep levels.
Sensitivity
Press the UP/DOWN buttons to select the desired
sensitivity level.
Min – the least sensitive
Max – the most sensitive
Airsoft – extreme sensitivity for Airsoft use
Filter
Press the UP/DOWN buttons to choose between the
lter values (0.02sec to 0.09sec).
To Next Page
Loading...