dacell DN501A - 3. SPECIFICATION; 3-1. Analog Input & A;D Conversion; 3-2. Digital Part

3. SPECIFICATION
3-1. Analog Input & A/D Conversion
Input Sensitivity
0.45㎶ / Digit
Load Cell Excitation
DC 10V ( - 5V ~ + 5V )
Max. Signal Input Voltage
Max.32mV
Temperature Coefficient
[Zero] ±20PPM/℃
[Span] ±20PPM/℃
Input Noise
±0.6㎶ P.P
Input Impedance
Over 10㏁
A/D Conversion Method
Sigma-Delta
A/D Resolution(Internal)
260,000 Count(18bit)
A/D Sampling Rate
Max. 80times / Sec
Non-Linearity
0.01% FS
Display Resolution(External)
1/30,000
3-2. Digital Part
Display Parts Specification
Display
Main Display
7Segments, 6digits 1.0 inch Red color FND
Size : 25.4(H) ×14.4(W)mm
Min. Division
×1, ×2, ×5, ×10, ×20, ×50
Max. display value +999,950
Under Zero value "-" (Minus display)
Status lamp
Steady, Zero, Print,
Gross, Auto, g, kg, ton,
Tare, RTxD
Green color Condition display Lamp (10pcs)
K e y
Number, Function Key Number Key, Function (12pcs)
4 / 41