Data Transference count setting – Port 1(Standard)
F36
0 About 40times/sec
1 About 30times/sec
2 About 20times/sec
●
3 About 15times/sec
4 About 10times/sec
5 About 5times/sec
6 About 3times/sec
Serial Printer Setting
Weight Unit selection (Printer)
F40
●
0 kg
1 g
2 ton
Weight Display Speed selection
F41
●
0 200times/sec
5 20times/sec
9 1time/sec
When Automatically print, Data output selection
F42
●
0
When weight reached Empty Range(F80 set value)
print.
- Check Empty Range
1
Over than Empty Range, Steady Lamp is “ON”, Automatically Print.
- Will not check Empty Range
Print Format selection
F43
●
0
Continuous Print
Serial No. and Weight will be printed continuously.
1
Single Print
Date, Time, S/N, ID No. Weighing Data will be print
31 / 49
To Next Page
Loading...
