Communication setting
Serial I/F Communication Speed selection
F31
0 600bps
1 1,200bps
2 2,400bps
3 4,800bps
●
4 9,600bps
5 19,200bps
6 38,400bps
7 57,600bps
8 115,200bps
Serial I/F Communication Mode setting (Under F33-00 setting, only)
F32
●
0 Stream Mode : Continuous Data transfer
1
Finish Mode : Single time data transfer, when the weight is finish
- When Finish Relay output, Data will be output.
2 Print Mode : Single time data transfer, when print key input
Serial I/F Transference method setting
F33
●
0 Simplex Mode
1 Duplex Mode / Command Mode
2 Not Use
3 External Display Mode
ID No. setting
F34 01
01
+
99
ID No. setting with No. key.
(01 ~99 settable)
Transferred Data Format – Port No.1(Standard)
F35
●
0 Format 1.
1 Format 2. (Format 1 + time)
30 / 49
To Next Page
Loading...
