Dacor 65537 - Pausing Dishwasher Operation; Stop; Sanitizing the Dishes; Sani-Rinse

Operating Your Dishwasher
17
Use and Care Manual
Pausing Dishwasher Operation
STOP
To temporarily pause dishwasher operation:
1. Open the door. The dishwasher will stop operating.
2. Press the START/STOP button.
3. The door may be closed and the dishwasher will not
start.
To resume the dishwasher cycle:
1. Open the door.
2. Press the START/STOP button.
3. After a brief pause, the dishwasher will resume the
previous cycle.
Sanitizing the Dishes
SANI-RINSE
If you want a high temperature rinse after the wash cycle for
maximum sanitization:
1. Press the NORMAL button to select the normal wash
cycle.
2. Press SANI-RINSE. (Pressing SANI-RINSE a second
time will turn sani-rinse off again).
3. Press START/STOP.
4. Close the door. After a short pause, the dishwasher will
start.
IMPORTANT: SANI-RINSE can only be selected when the NORMAL
wash cycle is selected.
SANI
RINSE
NORMAL
START
STOP
START
STOP
START
STOP