Need help?Do you have a question about the Dacor Dishwasher and is the answer not in the manual?
General| Brand | Dacor |
|---|---|
| Model | Dishwasher |
| Category | Dishwasher |
| Language | English |
Details on removing the outer and inner toe kick panels for access.
Steps for safely removing the inline water heater component.
Methods for removing the circulation pump assembly.
Procedure for removing the back panel to access rear components.
Steps to remove the circ-sump assembly for service accessibility.
Instructions for removing the WPS sensor and pressure switch.
Procedure for removing the float assembly and its components.
Steps to disconnect and remove the drain pump.
Details on removing the floor guard switch and its mounting tab.
Instructions for removing the sump by loosening the collar.
Steps to remove the water valve, including supply and wiring.
Procedure for separating the inner and outer door assemblies.
Steps to change the membrane by separating door assemblies.
Instructions for removing the door switch from the door assembly.
Procedure to remove the control board by accessing the panel and disconnecting cables.
How to remove the inner and outer filters from the tank.
Steps to remove the lower spray arm by taking out the securing nut.
Procedure to remove and install lower rack wheels.
How to remove the upper rack by releasing locking tabs.
Instructions on removing rack slides secured by nuts.
Steps to remove the detergent cup assembly from the door.
Procedure for removing the anti-siphon valve by turning a plastic nut.
Step-by-step instructions for initiating the factory test mode.
Schedule for expected component operation timing during the factory test.
Details on circulation pump function, resistance testing, and capacitor failure.
Information on detergent dispenser functions and solenoid resistance checks.
Explanation of the door latch's role and how to test its circuit.
Details on drain pump operation, power, and required installation features.
Overview of the control board's role in managing operations and receiving sensor data.
Description of the 3-color status LED on ED models for indicating operational status.
Information on the floor guard assembly and troubleshooting water detection.
Details on the inlet valve's function and checks for tank fill or flow issues.
Safety precautions and technical details for servicing the inline water heater.
Function of the membrane keypad for entering wash cycles and options.
Role of the power board in regulating components and potential failures.
Information on the pressure switch's role in sensing water levels and troubleshooting.
Details on the Wash Process Sensor (WPS) for detecting water soil and temperature.
To Next Page
