Dacor Dishwasher - Float Assembly Removal

Dishwasher Service Manual
Troubleshooting and Repair
76
7. Float Assembly Removal
If the Styrofoam oat becomes damaged and needs replacement:
• Pull the unit from the cutout to access the back and remove the back panel.
• On the back of the oat bracket you will nd a movable tab, bend it up and slide the oat
out the back.
• Replace the faulty oor guard with the new oat.
NOTE: The movable tab has a limited life span. If the oor guard has been replaced
more than twice, you may experience weakness in the tab.
7a
7b
Microswitch
Upper NO
and lower NC
leads used
(middle not used)
!