Dacor DCM24 w/ACTK27 User Manual

PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
CI.26
Microwave/Warming Oven
COMBINATION INSTALLATIONS
16 3/4"
(425mm)
“A”
9 1/8"
(232mm)
“B”
1 1/2"
(38mm)
Min.
3/4"
(19mm)
Min.
120V
Microwave
Receptacle
120V Warming
Oven Receptacle
1
1
7/8“ (22mm) Min.
29"
(737mm)
Overall
Stacked
Height
19 1/8"
(486mm)
“A”
9 1/8"
(232mm)
“B”
1 3/8"
(35mm)
Min.
3/4"
(19mm)
Min.
120V
Microwave
Receptacle
1
1
3/4“ (19mm) Min.
31 1/8"
(791mm)
Overall
Stacked
Height
120V Warming
Oven Receptacle
CUTOUT DIMENSIONS
DMT2420 ShOWN
CUTOUT DIMENSIONS
DCM24 ShOWN
Microwave
Model No. “A” Cutout Width
DMT2420 w/Trim Kit 24 3/8” (619mm)
DCM24 w/ACTK27 25 1/4” (641mm)
DCM24 w/ACTK30 28 1/4” (718mm)
DCM24 w/ACTK36 25” (635mm)
Warming
Oven
Models “B” Cutout Width
27” 25 1/2” (648mm)
30” 28 1/2” (724mm)
36” 34 3/8” (873mm)
1/1
Revised
08/26/08
All tolerances: +1/16”, -0, (+1.6mm, -0) unless otherwise stated
NOTE:
1. 3/4” (19mm) support platform (flush with cutout).
2. See individual appliance Planning Guide pages to
determine overlays.
3. Spacing between appliances and drawers/doors
shown is minimum required to allow for ventilation
and prevent scraping. Additional space may need
to be added for appearance.

Dacor DCM24 w/ACTK27 Specifications

General

Brand	Dacor
Model	DCM24 w/ACTK27
Category	Microwave Oven
Language	English

Summary

Combination Installations

DMT2420 Cutout Dimensions

Illustrates the required cutout dimensions and key measurements for the Dacor DMT2420 model.

DCM24 Cutout Dimensions

Illustrates the required cutout dimensions and key measurements for the Dacor DCM24 model.

Important Installation Notes

Provides guidance on support platform, overlays, and spacing for ventilation and door clearance.

Model Cutout Width Specifications

Lists specific cutout width data for various Dacor Microwave and Warming Oven models.