Dacor Discovery DYF30BFBPR - Default Settings; Factory Default Settings

15
Operation
FreshZone Setting
The freezer compartment can, if required, be converted to the
refrigeration or “fresh” operation. See page 5 for refrigeration
and “fresh” temperature ranges.
To change the FreshZone freezer
compartment temperature range:
Tap MENU and refrigerator
(down) to un-lock keypad (if
locked)
Key-pad Unlocked
appears on display
Tap MENU
Functions appears on
display
Tap
(down)
Settings appears on
display
Tap SELECT
FreshZone Options
appears on display
Tap SELECT
The current FreshZone
compartment setting appears
on display
Tap
(down) repeatedly
until...
The desired compartment
setting appears on display
(Freezer/Fridge/Fresh)
Tap SELECT
Select to Conrm
appears on display
Tap SELECT
FreshZone Options
appears on display
Tap MENU repeatedly until it is
no longer lit.
Main display appears
Default Settings
Use this feature to change the appliance back to the settings
entered at the factory.
IMPORTANT
If the unit is restored to the factory default settings, the
FreshZone freezer compartment will be restored to freezer
mode. If the FreshZone compartment was previously being
used in fridge or “fresh” mode, be sure to set it back to the
desired setting.
To change the appliance back to the
factory default settings:
Tap MENU and refrigerator
(down) to un-lock keypad (if
locked)
Key-pad Unlocked
appears on display
Tap MENU
Functions appears on
display
Tap
(down)
Settings appears on
display
Tap SELECT
FreshZone Options
appears on display
Tap
(down)
Default Settings
appears on display
Tap SELECT
Select to Conrm
appears on display
Tap SELECT
Default Settings
appears on display
Tap MENU repeatedly until it is
no longer lit.
Main display appears
Date Setting
To set the date shown on the display:
Tap MENU and refrigerator
(down) to un-lock keypad (if
locked)
Key-pad Unlocked
appears on display
Tap MENU
Functions appears on
display
Tap
(down)
Settings appears on
display
Tap SELECT
FreshZone Options
appears on display
Tap
(down) repeatedly
until...
Date appears on display
Tap SELECT
Set Date appears on
display
Tap SELECT
The current date setting
appears, for example DATE:
01-15-15 appears on
display
Tap
(up) or (down)
repeatedly until...
Desired month appears on
display, then Tap SELECT
Tap
(up) or (down)
repeatedly until...
Desired day appears on
display, then Tap SELECT
Tap (up) or (down)
repeatedly until...
Desired year appears on
display
Tap SELECT
Set Date appears on
display
Tap MENU repeatedly until it is
no longer lit.
Main display appears