Do you have a question about the Dacor DTG36M955F and is the answer not in the manual?
Instructions for professional installers regarding installation requirements and warranty.
Precautions for proper installation, including qualified installers and code compliance.
Guidelines for providing adequate natural or propane gas supply and pressure.
Details on voltage, amperage, grounding, and circuit requirements for the cooktop.
General guidance and steps for installing the gas cooktop, including unpacking.
Instructions for safely connecting the gas supply, including shut-off valve and leak testing.
Methods for detecting gas leaks using liquid leak detector, avoiding open flames.
Steps for safely connecting the power cord to a grounded outlet.
Procedure to test each burner's ignition and flame control after installation.
Detailed steps and warnings for converting the cooktop from natural gas to propane.
Step-by-step guide to adjust the pressure regulator for LP gas use.
Instructions on how to remove and replace burner orifices for LP gas conversion.
Procedure to adjust the simmer setting for optimal low flame performance.
Instructions for professional installers regarding installation requirements and warranty.
Precautions for proper installation, including qualified installers and code compliance.
Guidelines for providing adequate natural or propane gas supply and pressure.
Details on voltage, amperage, grounding, and circuit requirements for the cooktop.
General guidance and steps for installing the gas cooktop, including unpacking.
Instructions for safely connecting the gas supply, including shut-off valve and leak testing.
Methods for detecting gas leaks using liquid leak detector, avoiding open flames.
Steps for safely connecting the power cord to a grounded outlet.
Procedure to test each burner's ignition and flame control after installation.
Detailed steps and warnings for converting the cooktop from natural gas to propane.
Step-by-step guide to adjust the pressure regulator for LP gas use.
Instructions on how to remove and replace burner orifices for LP gas conversion.
Procedure to adjust the simmer setting for optimal low flame performance.











