Dacor EOR Series - Installation Instructions; Verify the Package Contents; Remove the Oven Door(S)

8
Installation Instructions
Verify the Package Contents
Verify that all the components below have been provided. If any item is missing or damaged, please contact your dealer
immediately. Do not install a damaged or incomplete appliance. Make sure that you have everything necessary to ensure
proper installation before proceeding.
• Exhaust grill with 2 mounting screws (2, #8 X 3/8”,
color should match exhaust grill: Silver Dacor PN
83571, Black Dacor PN 83263)
• Dacor Stainless Steel Cleaner
(stainless steel models only)
• Meat probe
Remove the oven door(s)
• Use and care manual
• Mounting screws (Wood, #6 X ¾, Dacor PN 83331, 4
for single ovens, 6 for double ovens)
• Standard oven racks (single ovens come with 2, double
ovens come with either 4 or 5)
• GlideRack™ oven rack (1)
• Broil grill and pan
Remove the door(s) to reduce weight and make the
oven easier to lift:
WARNING
• Do not attempt to disengage the hinge catches with
the door removed from the oven. The hinge springs
could release, causing personal injury.
• Do not lift or carry oven door by the door handle.
• On double ovens, remove the bottom door first to
reduce the chance of damage.
Removing the Oven Door(s): All Models
Except EORS136
See facing page for removing door from model
EORS136.
1. Open the door to its fully opened position.
2. Rotate the catch over the retaining arm on both hinges.
3. Lifttheovendoortoabouta30˚anglefromthehori-
zontal.
4. Pull the door away from the oven while continuing to
lift.
Catch
Step 2
30º
Grab both sides of the
door and pull out at a 30°
angle to remove.
Gripping
point
Gripping
point
Steps 3 and 4