Dacor ILb8 User Manual

IMPORTANT
1. Before beginning installation, please thoroughly read and become familiar with these instructions.
2. Installation and service must be completed by a qualified installer or service agency.
3. Installer: Please leave these Installation Instructions with the owner.
4. Owner: Please keep these instructions for local electrical inspector’s use and for future reference.
5. Read the accompanying Use & Care Manual prior to operating this appliance.
TABLE OF STEPS
Installation Planning Pages 2-3
Electrical Connection Pages 3-5
Installing the ILB Page 6
Installing the REMP Page 6
Verifying Proper Operation Page 6
Part No. 65265 Rev. D
TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI/UL507, STANDARD FOR ELECTRIC FANS, AND
CSA C22.2 NO. 113, STANDARD FOR FANS AND VENTILATORS.
NOTES:
Contain helpful hints and tips to facilitate the installation.
CONVENTIONS USED IN THESE INSTRUCTIONS
WARNINGS:
Must be followed carefully to avoid personal injury or damage.
READ AND SAVE THESE INSTRUCTIONS
Installation Instructions
Remote Blowers

Dacor ILb8 Specifications

General

Brand	Dacor
Model	ILb8
Category	Blower
Language	English

Summary

Conventions Used in These Instructions

Warnings

Explains the meaning of warning symbols used throughout the installation instructions.

Notes

Explains the meaning of note symbols used to provide helpful installation hints.

Important Installation Points

Key general points to be aware of before beginning the installation process.

Table of Steps Overview

Lists the main installation steps with corresponding page references for guidance.

Important Safety Instructions

Critical Safety Warnings

Details critical warnings to prevent fire, electric shock, and personal injury during installation.

General Cautions

Provides cautions regarding general ventilation use and proper exhaust air ducting.

Ducting Installation Notes

Offers advice on ducting size, runs, sealing, and potential impact on cooktop performance.

Installation Planning and Specifications

ILB Blower Dimensions and Specs

Lists overall dimensions, electrical requirements, and specifications for ILB models.

REMP Blower Dimensions and Specs

Lists overall dimensions, electrical requirements, and specifications for REMP models.

Electrical Connection Procedures

REMP Roof Mounting

Illustrates procedures for installing the REMP unit on flat and sloped roofs.

Electrical Connection Warnings and Notes

Details important warnings and notes for ensuring a safe and proper electrical connection.

Wiring Diagrams

RV Unit Wiring Configurations

Wiring diagrams for RV units with REMP, CABP3, or ERV/PRV configurations.

DACOR Hood Wiring

Wiring diagrams illustrating connections for DACOR hoods with ILB or REMP blowers.

Remote Blower/Hood Wiring

Wiring diagram for DACOR remote blower/hood systems with ILB and REMP units.

Installation and Verification

Installing the ILB

Instructions for mounting the ILB blower unit using provided hardware.

Installing the REMP

Instructions for mounting the REMP blower unit to the wall or roof.

Verifying Proper Operation

Steps to verify the blower's operation after installation, including power checks.

Troubleshooting Notes

Guidance for troubleshooting if the remote blower does not operate correctly.