Dacor REMP3 User Manual

IMPORTANT
1. Before beginning installation, please thoroughly read and become familiar with these instructions.
2. Installation and service must be completed by a qualified installer or service agency.
3. Installer: Please leave these Installation Instructions with the owner.
4. Owner: Please keep these instructions for local electrical inspector’s use and for future reference.
5. Read the accompanying Use & Care Manual prior to operating this appliance.
TABLE OF STEPS
Installation Planning Pages 2-3
Electrical Connection Pages 3-5
Installing the ILB Page 6
Installing the REMP Page 6
Verifying Proper Operation Page 6
Part No. 65265 Rev. D
TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI/UL507, STANDARD FOR ELECTRIC FANS, AND
CSA C22.2 NO. 113, STANDARD FOR FANS AND VENTILATORS.
NOTES:
Contain helpful hints and tips to facilitate the installation.
CONVENTIONS USED IN THESE INSTRUCTIONS
WARNINGS:
Must be followed carefully to avoid personal injury or damage.
READ AND SAVE THESE INSTRUCTIONS
Installation Instructions
Remote Blowers

Dacor REMP3 Specifications

General

Brand	Dacor
Model	REMP3
Category	Blower
Language	English

Summary

Important Safety Instructions

General Safety Warnings

Safety warnings regarding fire, electric shock, injury, and proper ventilation practices.

Cautions and Installation Notes

Precautions for general ventilation, proper exhaust, and installation notes like ducting.

Installation Planning

Blower Model Dimensions and Specifications

Physical dimensions and electrical/performance specs for ILB and REMP blower models.

Electrical Connection Procedures

Electrical Safety Warnings

Crucial safety warnings for electrical connections, grounding, and wiring practices.

Wiring Notes and Compliance

Notes on making electrical connections and compliance with electrical codes and standards.

Installation and Operation Verification

Mounting Blowers

Instructions for mounting the ILB and REMP units.

Verifying Operation and Troubleshooting

Steps to verify function, and troubleshooting if the blower does not operate properly.