PLANNING
GUIDE
www.Dacor.com Phone: (800) 793-0093
Specications subject to change without notice.
Install all appliances according to accompanying installation instructions.
8.7
RV30, RV36, RV46
26 3/4"
(679 mm)
1/2” (13 mm)
thick stiffener
across back
4 5/8" (117 mm)
9 7/8” (251 mm)
with CABP3
blower installed
Vent shown
in raised
position
Product
data label
2 5/16"
(59 mm)
9/16"
(14 mm)
3 1/8"
(79 mm)
2"
(51 mm)
B
A
Adjustable
anchor legs
1 13/16"
(46 mm)
1 15/16"
(49 mm)
3/16"
(5 mm)
Top cap with
vent down
7" (178 mm)
7 1/2" (191 mm)
Front View
15/16" (24 mm)
28"
(711 mm)
to
34"
(864 mm)
Model
Number
A - Top Cap
Width
B - Chassis
Width
RV30 30” (762 mm) 27 3/8” (695 mm)
RV36 36” (914 mm) 33 3/8” (848 mm)
RV46 46” (1168 mm) 43 3/8” (1102 mm)
All tolerances: +1/16”, -0, (+1.6 mm, -0) unless otherwise stated
NOTES:
Install these raised vents only with approved Dacor 1.
cooktops. See the planning guide for the particular
appliance for proper applications and cutout information.
This appliance must be install in conjunction with a 2.
single Dacor approved cabinet, remote or in-line blower.
See following pages for approved blowers. For detailed
information on the remote and in-line blowers,
refer to the blower’s installation instructions.
Document # PG08-003
Revised 03/29/10 Page 1/7
WARNING
Observe all governing codes and ordinances •
during planning and installation. Contact your
local building department for further information.
This appliance must be installed in accordance •
with the accompanying installation instructions.
30”, 36”, 46” Wide,
Raised Vent
To Next Page
Need help?
General
